2013 Kia Sorento
Mileage
162,130
Service Date
5/11/2026
Services Performed
- check brakes and advise
- check stalling coming to the stop
- turn 2 rotors
- Fuel System Clean [Includes Disable Fuel Supply System, run engine on pressurized injector detergent clean throttle body, fuel injectors and intake manifold. Test Drive
- Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
- BRAKE SHOES &/OR PADS – Remove & Replace – Rear, Both Sides – [Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.]
- AXLE SHAFT – Remove & Replace – Front, One – [NOTE: For Independent Suspension Type Axles, this operation consists of removal and installation, dissassembly and reassembly of the Axle Shaft Assembly and replacement of the Axle Shaft.]
- VALVE COVER GASKET – Remove & Replace – In-Line4, DI
- ALTERNATOR DRIVE BELT – Remove & Replace – In-Line4 – [Includes: Serpentine and V-Belt type Belt(s).]
- BATTERY – Remove & Replace – [Includes: Test.]
- Road test for power steering operation. Inspect system for leaks. Flush power steering lines, pump, rack and pinion, and or gear box. Install new power steering fluid. Install power steering additive to revitalize seals. Road test.
- Road test and verify engine performance, transmission operation, and shift patterns. Flush transmission which includes: flushing of transmission cooler, cooler lines, valve body, and torque converter. Flush all contaminated fluid out and replace with new transmission fluid.
Kim G. gave our service a 5 star review on 5/11/2026
